Essence We.R Podręcznik Użytkownika Pobierz pdf (Strona 223)

Administration of the WeR@Home™ System

System User Guide

223

and a burglary alarm flow will start (notifications, emails etc.)

n A premises exit delay of 30 seconds will be triggered only once the system was armed via a Tag

Reader.

This delay allows the User to arm the system and leave the premises without triggering an alarm on the way

out.

The Tag Reader and Siren (if installed) will sound short beeps to notify the User of this delay.

Common use of the Entry/Exit feature – usually enabled for a Magnetic Sensor (MGL) installed on the main

entrance door, or for a Motion Detector (PIR) or Camera (IPD) which installed in the entrance.

Note: Also please refer to paragraph 4.5.4.2 below regarding more complex

installations combining multiple sensors.

4.5.4.2 Devices Allowing Walk-Through

This feature is provided for cases where a Camera (or Motion Detector) device is installed in close proximity

to a premises’ entry door equipped with a Magnetic Sensor and defined as Entry/Exit, where such device

might trigger an alarm within the delay period.

Notes: The Walk-Through configuration may be enabled, per device, for the security

devices (PIR/IPD/MGL).

This feature will become operational only if another security device in the system is

configured as Entry/Exit.

Configuring a device as Walk-Through with no other device configured as Entry/Exit is

feasible, but will have no functional value in the system.

A single device may be defined as either Entry/Exit or Walk-Through.

Once the Walk-Through feature is enabled:

n Throughout the 30 seconds delay period of an Entry/Exit configured device, the device configured as

Walk-Through will trigger an alarm only if triggered before the device defined as Entry/Exit.

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 290 291

Brak uwag

Essence We.R Podręcznik Użytkownika Strona 223